Basic C Questions to text ur Expertise

1.What is the benefit of using const for declaring constants?
The benefit of using the const keyword is that the compiler might be able to make optimizations based on the knowledge that the value of the variable will not change. In addition, the compiler will try to ensure that the values won’t be changed inadvertently.
Of course, the same benefits apply to #defined constants. The reason to use const rather than #define to define a constant is that a const variable can be of any type (such as a struct, which can’t be represented by a #defined constant). Also, because a const variable is a real variable, it has an address that can be used, if needed, and it resides in only one place in memory

2.What is the easiest sorting method to use?
The answer is the standard library function qsort(). It’s the easiest sort by far for several reasons:
It is already written.
It is already debugged.
It has been optimized as much as possible (usually).
Void qsort(void *buf, size_t num, size_t size, int (*comp)(const void *ele1, const void *ele2));

3.How many levels of pointers can you have?
The answer depends on what you mean by levels of pointers. If you mean How many levels of indirection can you have in a single declaration? the answer is At least 12.
int i = 0;
int *ip01 = & i;
int **ip02 = & ip01;
int ***ip03 = & ip02;
int ****ip04 = & ip03;
int *****ip05 = & ip04;
int ******ip06 = & ip05;
int *******ip07 = & ip06;
int ********ip08 = & ip07;
int *********ip09 = & ip08;
int **********ip10 = & ip09;
int ***********ip11 = & ip10;
int ************ip12 = & ip11;
************ip12 = 1; /* i = 1 */
The ANSI C standard says all compilers must handle at least 12 levels. Your compiler might support more.

4.Is it better to use a macro or a function?
The answer depends on the situation you are writing code for. Macros have the distinct advantage of being more efficient (and faster) than functions, because their corresponding code is inserted directly into your source code at the point where the macro is called. There is no overhead involved in using a macro like there is in placing a call to a function. However, macros are generally small and cannot handle large, complex coding constructs. A function is more suited for this type of situation. Additionally, macros are expanded inline, which means that the code is replicated for each occurrence of a macro. Your code therefore could be somewhat larger when you use macros than if you were to use functions.
Thus, the choice between using a macro and using a function is one of deciding between the tradeoff of faster program speed versus smaller program size. Generally, you should use macros to replace small, repeatable code sections, and you should use functions for larger coding tasks that might require several lines of code.

5.What are the standard predefined macros?
The ANSI C standard defines six predefined macros for use in the C language:
Macro Name Purpose
_ _LINE_ _ Inserts the current source code line number in your code.
_ _FILE_ _ Inserts the current source code filename in your code.
_ _ Inserts the current date of compilation in your code.
_ _TIME_ _ Inserts the current time of compilation in your code.
_ _STDC_ _ Is set to 1 if you are enforcing strict ANSI C conformity.
_ _cplusplus Is defined if you are compiling a C++ program.

7. What is a const pointer?
The access modifier keyword const is a promise the programmer makes to the compiler that the value of a variable will not be changed after it is initialized. The compiler will enforce that promise as best it can by not enabling the programmer to write code which modifies a variable that has been declared const.
A const pointer, or more correctly, a pointer to const, is a pointer which points to data that is const (constant, or unchanging). A pointer to const is declared by putting the word const at the beginning of the pointer declaration. This declares a pointer which points to data that can’t be modified. The pointer itself can be modified. The following example illustrates some legal and illegal uses of a const pointer:
const char *str = hello;
char c = *str /* legal */
str++; /* legal */
*str = ‘a’; /* illegal */
str[1] = ‘b’; /* illegal */

8.What is a pragma?
The #pragma preprocessor directive allows each compiler to implement compiler-specific features that can be turned on and off with the #pragma statement. For instance, your compiler might support a feature called loop optimization. This feature can be invoked as a command-line option or as a #pragma directive.
To implement this option using the #pragma directive, you would put the following line into your code:
#pragma loop_opt(on)
Conversely, you can turn off loop optimization by inserting the following line into your code:
#pragma loop_opt(off)

9.What is #line used for?
The #line preprocessor directive is used to reset the values of the _ _LINE_ _ and _ _FILE_ _ symbols, respectively. This directive is commonly used in fourth-generation languages that generate C language source files.

10.What is the difference between text and binary modes?
Streams can be classified into two types: text streams and binary streams. Text streams are interpreted, with a maximum length of 255 characters. With text streams, carriage return/line feed combinations are translated to the newline n character and vice versa. Binary streams are uninterpreted and are treated one byte at a time with no translation of characters. Typically, a text stream would be used for reading and writing standard text files, printing output to the screen or printer, or receiving input from the keyboard.
A binary text stream would typically be used for reading and writing binary files such as graphics or word processing documents, reading mouse input, or reading and writing to the modem.

11.How do you determine whether to use a stream function or a low-level function?
Stream functions such as fread() and fwrite() are buffered and are more efficient when reading and writing text or binary data to files. You generally gain better performance by using stream functions rather than their unbuffered low-level counterparts such as read() and write().
In multi-user environments, however, when files are typically shared and portions of files are continuously being locked, read from, written to, and unlocked, the stream functions do not perform as well as the low-level functions. This is because it is hard to buffer a shared file whose contents are constantly changing. Generally, you should always use buffered stream functions when accessing nonshared files, and you should always use the low-level functions when accessing shared files

12.What is static memory allocation and dynamic memory allocation?
Static memory allocation: The compiler allocates the required memory space for a declared variable.By using the address of operator,the reserved address is obtained and this address may be assigned to a pointer variable.Since most of the declared variable have static memory,this way of assigning pointer value to a pointer variable is known as static memory allocation. memory is assigned during compilation time.
Dynamic memory allocation: It uses functions such as malloc( ) or calloc( ) to get memory dynamically.If these functions are used to get memory dynamically and the values returned by these functions are assingned to pointer variables, such assignments are known as dynamic memory allocation.memory is assined during run time.

13.When should a far pointer be used?
Sometimes you can get away with using a small memory model in most of a given program. There might be just a few things that don’t fit in your small data and code segments. When that happens, you can use explicit far pointers and function declarations to get at the rest of memory. A far function can be outside the 64KB segment most functions are shoehorned into for a small-code model. (Often, libraries are declared explicitly far, so they’ll work no matter what code model the program uses.) A far pointer can refer to information outside the 64KB data segment. Typically, such pointers are used with farmalloc() and such, to manage a heap separate from where all the rest of the data lives. If you use a small-data, large-code model, you should explicitly make your function pointers far.

14.What is the difference between far and near?
Some compilers for PC compatibles use two types of pointers. near pointers are 16 bits long and can address a 64KB range. far pointers are 32 bits long and can address a 1MB range.
Near pointers operate within a 64KB segment. There’s one segment for function addresses and one segment for data. far pointers have a 16-bit base (the segment address) and a 16-bit offset. The base is multiplied by 16, so a far pointer is effectively 20 bits long. Before you compile your code, you must tell the compiler which memory model to use. If you use a smallcode memory model, near pointers are used by default for function addresses.
That means that all the functions need to fit in one 64KB segment. With a large-code model, the default is to use far function addresses. You’ll get near pointers with a small data model, and far pointers with a large data model. These are just the defaults; you can declare variables and functions as explicitly near or far.
far pointers are a little slower. Whenever one is used, the code or data segment register needs to be swapped out. far pointers also have odd semantics for arithmetic and comparison. For example, the two far pointers in the preceding example point to the same address, but they would compare as different! If your program fits in a small-data, small-code memory model, your life will be easier.

15.When would you use a pointer to a function?
Pointers to functions are interesting when you pass them to other functions. A function that takes function pointers says, in effect, Part of what I do can be customized. Give me a pointer to a function, and I’ll call it when that part of the job needs to be done. That function can do its part for me. This is known as a callback. It’s used a lot in graphical user interface libraries, in which the style of a display is built into the library but the contents of the display are part of the application.
As a simpler example, say you have an array of character pointers (char*s), and you want to sort it by the value of the strings the character pointers point to. The standard qsort() function uses function pointers to perform that task. qsort() takes four arguments,
- a pointer to the beginning of the array,
- the number of elements in the array,
- the size of each array element, and
- a comparison function, and returns an int.

16.How are pointer variables initialized?
Pointer variable are initialized by one of the following two ways
- Static memory allocation
- Dynamic memory allocation

17.How can you avoid including a header more than once?
One easy technique to avoid multiple inclusions of the same header is to use the #ifndef and #define
preprocessor directives. When you create a header for your program, you can #define a symbolic name that is unique to that header. You can use the conditional preprocessor directive named #ifndef to check whether that symbolic name has already been assigned. If it is assigned, you should not include the header, because it has already been preprocessed. If it is not defined, you should define it to avoid any further inclusions of the header. The following header illustrates this technique:
#ifndef _FILENAME_H
#define _FILENAME_H
#define VER_NUM 1.00.00
#define REL_DATE 08/01/94
#if _ _WINDOWS_ _
#define OS_VER WINDOWS
#else
#define OS_VER DOS
#endif
#endif
When the preprocessor encounters this header, it first checks to see whether _FILENAME_H has been defined. If it hasn’t been defined, the header has not been included yet, and the _FILENAME_H symbolic name is defined. Then, the rest of the header is parsed until the last #endif is encountered, signaling the end of the conditional #ifndef _FILENAME_H statement. Substitute the actual name of the header file for FILENAME in the preceding example to make it applicable for your programs.
18.Difference between arrays and pointers?
- Pointers are used to manipulate data using the address. Pointers use * operator to access the data pointed to by them
- Arrays use subscripted variables to access and manipulate data.Array variables can be equivalently written using pointer expression.

19.What are the advantages of the functions?
- Debugging is easier
- It is easier to understand the logic involved in the program
- Testing is easier
- Recursive call is possible
- Irrelevant details in the user point of view are hidden in functions
- Functions are helpful in generalizing the program

20.Is NULL always defined as 0?
NULL is defined as either 0 or (void*)0. These values are almost identical; either a literal zero or a void pointer is converted automatically to any kind of pointer, as necessary, whenever a pointer is needed (although the compiler can’t always tell when a pointer is needed).

22.What is the difference between NULL and NUL?
NULL is a macro defined in for the null pointer.
NUL is the name of the first character in the ASCII character set. It corresponds to a zero value. There’s no standard macro NUL in C, but some people like to define it.
The digit 0 corresponds to a value of 80, decimal. Don’t confuse the digit 0 with the value of ‘’ (NUL)! NULL can be defined as ((void*)0), NUL as ‘’.

23.Can the sizeof operator be used to tell the size of an array passed to a function?
No. There’s no way to tell, at runtime, how many elements are in an array parameter just by looking at the array parameter itself. Remember, passing an array to a function is exactly the same as passing a pointer to the first element.
24.Is using exit() the same as using return?
No. The exit() function is used to exit your program and return control to the operating system. The return statement is used to return from a function and return control to the calling function. If you issue a return from the main() function, you are essentially returning control to the calling function, which is the operating system. In this case, the return statement and exit() function are similar.

23.Can math operations be performed on a void pointer?
No. Pointer addition and subtraction are based on advancing the pointer by a number of elements. By definition, if you have a void pointer, you don’t know what it’s pointing to, so you don’t know the size of what it’s pointing to. If you want pointer arithmetic to work on raw addresses, use character pointers.

24.Can the size of an array be declared at runtime?
No. In an array declaration, the size must be known at compile time. You can’t specify a size that’s known only at runtime. For example, if i is a variable, you can’t write code like this:
char array[i]; /* not valid C */
Some languages provide this latitude. C doesn’t. If it did, the stack would be more complicated, function calls would be more expensive, and programs would run a lot slower. If you know that you have an array but you won’t know until runtime how big it will be, declare a pointer to it and use malloc() or calloc() to allocate the array from the heap.